ISO-L-XBCEB 00/0/1
ISO-L-XBCDB 2/3
Lithium

True multi-purpose greases for general industrial applications requiring extreme pressure properties
0 & 00 grades for central lubrication
Operating range: -20°C to +130°C

ISO 6743-9: L-XBCEB 2
DIN 51 502: MPF2K -25

MULTIS MS is a true multi purpose grease, formulated for lubrication of various shock loaded or vibrating applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.
MULTIS MS is suitable for boundary lubrication at high pressures and high temperatures. In case of accidental overheating, the presence of molybdenum
disulfide will guarantee good lubrication, and avoid any jamming or sticking.
Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

ISO 6743-9: L-XBCHB 2
DIN 51 502: KP2K -20

MULTIS XHV is a multi purpose extreme pressure grease, formulated for the lubrication of all kinds of applications, operating at medium and slow speeds, where the grease is required to support exceptional heavy loads in wet, dusty and/or dry conditions.
MULTIS XHV is pre-eminently suitable as “Fifth wheel” grease in transport applications.
MULTIS XHV is also suitable as EP multi purpose grease, slow moving heavily charged industrial and “off road” applications where water is in frequent contact with the grease.
Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

ISO 6743-9: L-XBBIB1
DIN 51 502: MPG1-20
Approved by : Vallourec for protection of drilling tube threads during storage

Protection and lubrication of various types of equipment operating in very humid environments or in water (icluding sea water).
JET MARINE is primarily used for the protection of drilling tube threads during storage.
Also suitable for the lubrication of all types of anti-friction bearings, plain bearings, water pumps, shafts…
Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or brush.

ISO-L-XBEHB-2
DIN 51502 KP2P-20
Lithium Complex

A true multi purpose extreme pressure grease for various industrial applications particularly where the operation temperature is high and the use of conventional lithium greases is limited
Operating range: -20°C to +160°C

ISO 6743-9: L-XBEHB 2
DIN 51502: KP2P- 20

MULTIS COMPLEX HV is designed for the lubrication of various applications in all types of operating conditions, but particularly where the loads and operation temperature are high and the use of conventional lithium greases is limited.
MULTIS COMPLEX HV is a true multi purpose grease, formulated for lubrication of loaded slide-,ball-, and roller-bearings, wheelbearings, universal joints, chassis, and various shock loaded or vibrating applications in transport, agriculture and off road
vehicles.
Suitable as general purpose grease for industrial applications requiring a NLGI 2 grade medium high viscosity Extreme Pressure grease.
Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

ISO-L-XBFIB 1/2
DIN 51502 KP1R-25/KP2R-25
Calcium Sulfonate Complex

Extreme pressure multi purpose grease recommended for lubrication of applications operating at elevated temperatures in wet/dusty environments
Particularly suitable for marine, off-shore and various "off-road" conditions
Operating range: -25°C to +180°C

ISO-L-XBDIB 0
DIN 51502 OGPON-20
Calcium Sulfonate Complex

Very adhesive grease
Recommended for the lubrication of wire ropes, metal cables, chains, slide rails and open gears, found in marine, off-shore and industrial applications
Operating range: -20°C to +150°C

ISO-L-XBFHB 1/2
DIN 51502 KP1/2R-25
Calcium Sulfonate Complex

Grease for heavily loaded roller bearings operating at elevated temperatures in wet dusty environments (various applications found in Steel industry)
Exceptional water resistance and extreme pressure, excellent anti wear and anti-corrosion properties
Operating range: -25°C to +180°C

ISO 6743-9: L-XBDIB 0
DIN 51 502: OGP0N -25

CERAN CA is a heavy duty grease designed for use on slide rails, metal cables, wire ropes, winches, open gears and chains working under severe circumstances.
CERAN CA is used in cement works, mines and quarries, ports (e.g. travelling cranes) off shore, marine, and other “heavy” industry applications.
Always avoid contamination of the grease by dust and/or dirt when applying.

ISO 6743-9: L-XBFHB 1
DIN 51 502: KPF1R -20

CERAN MS is suitable for the lubrication of all kinds of components subject to high loads, shocks and vibrations, working in conditions where the grease is in frequent contact with water, e.g. traveling cranes, crown wheels, press joints, conveyors, gear couplings etc. in a multitude of industrial applications.
CERAN MS is suitable for boundary lubrication at high pressures and high temperatures. In case of accidental overheating, the presence of molybdenum disulfide will guarantee good lubrication, and avoid any jamming or sticking.
Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

ISO 6743-9: L-XBFHB 0
DIN 51 502: OGPF0R -25

CERAN GEP is pre-eminently designed for use on open gears of rotary drum drives, single and double pinion kiln and mill drives, working under severe circumstances.
Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump/spray system.

ISO-L-XDFEB 2
DIN 51502 KP2R-40
Polyurea

Synthetic high speed grease with outstanding low and high temperature performance. Particularly suited for electric motor bearings, fin fan bearings, high temperature pumps, automotive C-V Joints and filled for life wheel bearings
Extended lubrication intervals or filled for
life applications
Operating range: -40°C to +180°C

ISO 6743-9: L-XBFEA 2
DIN 51502: K2R-20

ALTIS EM 2 is pre-eminently designed for the lubrication of electrical motor bearings.
Also suitable for lubrication of bearings, slides, racks subjected to high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of extraction fans for hot gas or steam, bearings of dryers, pumps, oven conveyors, and all other applications where rotation speeds and temperatures are high.

ISO 6743-9: L-XAEEA 2/3
DIN 51502: MF2/3P -15

Lubrication of slow moving mechanisms subjected to very high temperatures and repeated shocks. The presence of molybdenum disulfide will guarantee good lubrication, and avoid any jamming or sticking.
Allows peak temperatures up to 220°C, provided that the period of operation at this temperature is limited and that the equipment is re-greased frequently.
CALORIS MS 23 grease offers the possibility of working in a corrosive atmosphere due to its resistance to mild alkaline and acidic solutions.

ISO-L-XAFBB 1
DIN 51502 MPF1R-10
Bentone and Copper

Anti-seize grease for applications working very severe corrosion conditions in presence of water vapour or aggressive gases

Approved by: VALLOUREC and MANNESMANN tubes, SUMITOMO.

TIFORA PG is an innovative heavy metal-free lubricating grease specifically developped for both protection and "make up" of ‘premium’ (casing/tubing) connections.
It can be used to replace the heavy metal API dopes (traditionally leaded) and also conventional protection products used for API connections.
It may also be used for applications where good anti-seizure properties are required.
If an anti-corrosion product is demanded, TIFORA PG can be proposed as an alternative, and is particularly suited when in a environment exposed to salt spray,
such as on marine and dockyard equipment.