Industrial

Sign up now!

Unigrade Trading Pte Ltd
No. 6 Tuas South Street 2, #01-01 Singapore, 638042

Tel : (+65) 6862 4733 | Fax: (+65) 6862 4755

INDUSTRIAL LUBRICANTS

Total

TOTAL is the world’s fourth largest international oil and gas major. Being among leaders in the lubricant markets in the world, TOTAL has carved out a position as a manufacturer and supplier of uncompromised quality and high performance lubricants and special fluids for nearly all automotive and industrial applications.

The lubricant market is governed by technical specifications and certification procedures which together constitute a set of international rules defined by quality standard and engine manufacturers.

That's why TOTAL developed a wide range of services and products with ever-higher performance levels to extend your equipment's life and reduce your fuel consumption.

Read More
Air Compressor

DACNIS SH
PAO synthetic oils for rotary air compressors.
ISO VG 32 to 100

Specifications
  • ISO 6743-3A: DAJ
Applications
  • PAO based synthetic oils for rotary air compressors
  • Particularly recommended for high discharge temperature and pressure
  • Long drain intervals, up to 8000 hours
Air Compressor

DACNIS SE
Di-Ester Synthetic oil air compressors.
ISO VG 46 to 100

Specifications
  • DIN 51 506VDL
  • ISO 6743-3A: DAJ
Applications
  • Di-ester based synthetic oils for air compressors (reciprocating high pressure, screw and rotary vane according to specific OEM recommendation, turbo-compressors and vacuum pumps)
  • High thermal stability
Air Compressor

DACNIS
Mineral oils for rotary and reciprocating air compressors
ISO VG 32 to 150

Specifications
  • ISO 6743-3 classified DAG & DAB for heavy duty applications.
  • DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.
  • Depending on the viscosity grades, DACNIS meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE...
Applications
  • Mineral oils with specific high performance additives designed to lubricate screw andreciprocating air compressors:
  • For screw compressors: DACNIS 32, 46, or 68
  • For reciprocating compressors: DACNIS 68, 100 or 150
  • For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.
Refrigerating Compressor

LUNARIA FR
Wax free naphthenic mineral oils for refrigerating compressors.
ISO VG 32 to 150

Specifications
  • OEM approvals:Carrier, Grasso, Howden,Sabroe, Bitzer...
Applications
  • Naphthenic wax-free mineral oils for refrigerating compressors using CFC, HCFC, ammonia with evaporator temperature down to -50°C (CFC) -30°C (HCFC) and -25°C (NH,)
  • Refrigerating gases: R12, R22, NH3
Refrigerating Compressor

LUNARIA SK
Alkylbenzene synthetic oils for refrigerating compressors.
ISO VG 55 to 150

Specifications
  • ISO 6743-3 DRE
  • APV, Bitzer, Bock, Sabroe, York, RefComp
Applications
  • Refrigerating machine compressors using CFC or HCFC coolants.
Refrigerating Compressor

LUNARIA KA
Synthetic Refrigerating Oil based on Alkylbenzene.
ISO VG 46 to 56

Specifications
  • KS M 2128-1987
  • JIS K 2211-1987
  • BS 2626-1992
Applications
  • TOTAL LUNARIA KA can be used for R-12, R-22, R123 and R 502 for refrigerating and air-conditioning system with reciprocating, screw or turbo- centrifugal type of compressor.
Refrigerating Compressor

LUNARIA KT
Synthetic Refrigerating Oil based on Alkylbenzene.
ISO VG 15 to 68

Specifications
  • KS M 2128-1987
  • JIS K 2211-1987
  • BS 2626-1992
Applications
  • TOTAL LUNARIA KT can be used for R-12, R-22, R123 and R 502 for refrigerating and air-conditioning system with reciprocating, screw or turbo- centrifugal type of compressor.
Refrigerating Compressor

PLANETELF ACD
Synthetic Polyol-ester oils for refrigerating compressors using HFC refrigerating gases.
ISO VG 22 to 220

Specifications
  • OEM approval: Aerzen, Bock, Carrier, Frascold, Grasso, Howden, Mc Quay, Sabroe, Tecumseh
Applications
  • Synthetic Polyol-ester (POE) oils for refrigerating compressors using HFC
  • Refrigerating gases: R134a, R404A, R507, R410A, R23
Refrigerating Compressor

PLANETELF PAG 244
Synthetic PAG type lubricant for car air conditioning.

Applications
  • Polyalkylene glycol lubricant, PAG, specially formulated for car air conditioning compressors using R134a as refrigerant.
  • PLANETELF PAG 244 is a low viscosity PAG oil for variable displacement compressors, where SANDEN SP 10 is recommended.
Refrigerating Compressor

PLANETELF PAG 488
Synthetic PAG type lubricant for car air conditioning.

Specifications
  • PLANETELF PAG 488 is approved by GENERAL MOTORS (DELPHI GM HARRISSON) under the GM Material Specification n° 9985752.
Applications
  • Polyalkylene glycol lubricant, PAG, specially formulated for car air conditioning compressors using R134a as refrigerant.
  • PLANETELF PAG 488 is a high viscosity PAG oil for fixed displacement compressors.
Refrigerating Compressor

PLANETELF PAG SP20
Synthetic PAG type lubricant for car air conditioning.

Specifications
  • PLANETELF PAG SP 20 is approved by SANDEN under the specification SANDEN SP 20.
Applications
  • Polyalkylene glycol lubricant, PAG, specially formulated for car air conditioning compressors using R134a as refrigerant.
  • PLANETELF PAG SP 20 (or SANDEN SP 20) is a high viscosity PAG oil for fixed displacement compressors allowing optimal operations of SANDEN compressors such as SD5H14, SD7B10, SD7H10, SD7H13, SD7H15/HD, SD7H15/SHD.
Heavy Duty Wet Enviroment Calcium Sulfornate Complex Grease

CERAN GEP
PAO synthetic oils for rotary air compressors.Extreme-pressure water resistant high temperature calcium sulfonate complex grease with solid lubricants.
NLGI 0

Specifications
  • ISO 6743-9: L-XBFHB 0
  • DIN 51 502: OGPF0R -25
Applications
  • CERAN GEP is pre-eminently designed for use on open gears of rotary drum drives, single and double pinion kiln and mill drives, working under severe circumstances.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump/spray system.
Heavy Duty Wet Enviroment Calcium Sulfornate Complex Grease

CERAN MS
Extreme-pressure water resistant high temperature calcium sulfonate complex grease with molybdenum disulfide.
NLGI 1

Specifications
  • ISO 6743-9: L-XBFHB 1
  • DIN 51 502: KPF1R -20
Applications
  • CERAN MS is suitable for the lubrication of all kinds of components subject to high loads, shocks and vibrations, working in conditions where the grease is in frequent contact with water, e.g. traveling cranes, crown wheels, press joints, conveyors, gear couplings etc. in a multitude of industrial applications.
  • CERAN MS is suitable for boundary lubrication at high pressures and high temperatures. In case of accidental overheating, the presence of molybdenum disulfide will guarantee good lubrication, and avoid any jamming or sticking.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.
Heavy Duty Wet Enviroment Calcium Sulfornate

CERAN CA
Extreme-pressure water resistant high temperature calcium sulfonate complex grease.
NLGI 0

Specifications
  • ISO 6743-9: L-XBDIB 0
  • DIN 51 502: OGP0N -25
Applications
  • CERAN CA is a heavy duty grease designed for use on slide rails, metal cables, wire ropes, winches, open gears and chains working under severe circumstances.
  • CERAN CA is used in cement works, mines and quarries, ports (e.g. travelling cranes) off shore, marine, and other “heavy” industry applications.
  • Always avoid contamination of the grease by dust and/or dirt when applying.
Heavy Duty Wet Enviroment Calcium Sulfornate Complex Grease

CERAN HV
Grease with exceptional water resistance and extreme pressure in high temperature and wet environments.
NLGI 1-2

Specifications
  • ISO-L-XBFHB 1/2
  • DIN 51502 KP1/2R-25
  • Calcium Sulfonate Complex
Applications
  • Grease for heavily loaded roller bearings operating at elevated temperatures in wet dusty environments (various applications found in Steel industry.
  • Exceptional water resistance and extreme pressure, excellent anti wear and anti-corrosion properties.
  • Always avoid contamination of the grease by dust and/or dirt when applying.
Heavy Duty Wet Enviroment Calcium Sulfornate Complex Grease

CERAN AD Plus
Adhesive grease for lubrication of wire ropes and chains in marine, offshore and industrial application.
NLGI 0-1

Specifications
  • ISO-L-XBDIB 0
  • DIN 51502 OGPON-20
  • Calcium Sulfonate Complex
Applications
  • Very adhesive grease.
  • Recommended for the lubrication of wire ropes, metal cables, chains, slide rails and open gears, found in marine, off-shore and industrial applications.
  • Operating range: -20°C to +150°C
Heavy Duty Wet Enviroment Calcium Sulfornate Complex Grease

CERAN WR
Extreme pressure multi purpose grease operating at high temperature and wet environments.
NLGI 1-2

Specifications
  • ISO-L-XBFIB 1/2
  • DIN 51502 KP1R-25/KP2R-25
  • Calcium Sulfonate Complex
Applications
  • Extreme pressure multi purpose grease recommended for lubrication of applications operating at elevated temperatures in wet/dusty environments.
  • Particularly suitable for marine, off-shore and various "off-road" conditions.
  • Operating range: -25°C to +180°C
Multi Purpose Lithuim Complex Grease

MULTIS COMPLEX HV
Multi purpose extreme pressure high temperature lithium/calcium complex grease.
NLGI 2

Specifications
  • ISO 6743-9: L-XBEHB 2
  • DIN 51502: KP2P- 20
Applications
  • MULTIS COMPLEX HV is designed for the lubrication of various applications in all types of operating conditions, but particularly where the loads and operation temperature are high and the use of conventional lithium greases is limited.
  • MULTIS COMPLEX HV is a true multi purpose grease, formulated for lubrication of loaded slide-,ball-, and roller-bearings, wheelbearings, universal joints, chassis, and various shock loaded or vibrating applications in transport, agriculture and off road vehicles.
  • Suitable as general purpose grease for industrial applications requiring a NLGI 2 grade medium high viscosity Extreme Pressure grease.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.
Multi Purpose Lithuim Complex Grease

MULTIS COMPLEX EP
Multi purpose Long life, high temperature and high pressure lithium grease.
NLGI 2

Specifications
  • ISO-L-XBEHB-2
  • DIN 51502 KP2P-20
  • Lithium Complex
Applications
  • A true multi purpose extreme pressure grease for various industrial applications particularly where the operation temperature is high and the use of conventional lithium greases is limited.
  • Operating range: -20°C to +160°C.
Multi Purpose Lithuim Calcium Grease

JET MARINE
Extreme-pressure water resistant calcium grease.
NLGI 1

Specifications
  • ISO 6743-9: L-XBBIB1
  • DIN 51 502: MPG1-20
  • Approved by: Vallourec for protection of drilling tube threads during storage
Applications
  • Protection and lubrication of various types of equipment operating in very humid environments or in water (icluding sea water).
  • JET MARINE is primarily used for the protection of drilling tube threads during storage.
  • Also suitable for the lubrication of all types of anti-friction bearings, plain bearings, water pumps, shafts...
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or brush.
Multi Purpose Lithuim Calcium Grease

MULTIS XHV
Multi purpose extreme pressure lithium/calcium grease.
NLGI 2

Specifications
  • ISO 6743-9: L-XBCHB 2
  • DIN 51 502: KP2K -20
  • Approved by: Vallourec for protection of drilling tube threads during storage
Applications
  • MULTIS XHV is a multi purpose extreme pressure grease, formulated for the lubrication of all kinds of applications, operating at medium and slow speeds, where the grease is required to support exceptional heavy loads in wet, dusty and/or dry conditions.
  • MULTIS XHV is pre-eminently suitable as “Fifth wheel” grease in transport applications.
  • MULTIS XHV is also suitable as EP multi purpose grease, slow moving heavily charged industrial and “off road” applications where water is in frequent contact with the grease.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.
Multi Purpose Lithuim Calcium Grease

MULTIS XHV
Multi purpose extreme pressure lithium/calcium grease.
NLGI 2

Specifications
  • ISO 6743-9: L-XBCHB 2
  • DIN 51 502: KP2K -20
  • Approved by: Vallourec for protection of drilling tube threads during storage
Applications
  • MULTIS XHV is a multi purpose extreme pressure grease, formulated for the lubrication of all kinds of applications, operating at medium and slow speeds, where the grease is required to support exceptional heavy loads in wet, dusty and/or dry conditions.
  • MULTIS XHV is pre-eminently suitable as “Fifth wheel” grease in transport applications.
  • MULTIS XHV is also suitable as EP multi purpose grease, slow moving heavily charged industrial and “off road” applications where water is in frequent contact with the grease.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.
Multi Purpose Lithuim Calcium Grease

MULTIS MS
Multi purpose extreme pressure lithium/calcium grease with molybdenum disulfide.
NLGI 2

Specifications
  • ISO 6743-9: L-XBCEB 2
  • DIN 51 502: MPF2K -25
Applications
  • MULTIS MS is a true multi purpose grease, formulated for lubrication of various shock loaded or vibrating applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.
  • MULTIS MS is suitable for boundary lubrication at high pressures and high temperatures. In case of accidental overheating, the presence of molybdenum.
  • Disulfide will guarantee good lubrication, and avoid any jamming or sticking.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.
Multi Purpose Lithuim Calcium Grease

MULTIS EP
Multi purpose pressure lithium grease.
NLGI 0-3

Specifications
  • ISO-L-XBCEB 00/0/1
  • ISO-L-XBCDB 2/3
  • Lithium
Applications
  • True multi-purpose greases for general industrial applications requiring extreme pressure properties.
  • 0 & 00 grades for central lubrication.
  • Operating range: -20°C to +130°C.
High Speed High Temp Polyurea Grease

ALTIS SH
Synthetic high speed grease for low and high temperature performance.
NLGI 2

Specifications
  • ISO-L-XDFEB 2
  • DIN 51502 KP2R-40
  • Polyurea
Applications
  • Synthetic high speed grease with outstanding low and high temperature performance. Particularly suited for electric motor bearings, fin fan bearings, high temperature pumps, automotive C-V Joints and filled for life wheel bearings.
  • Extended lubrication intervals or filled for life applications.
  • Operating range: -40°C to +180°C
High Speed High Temp Polyurea Grease

ALTIS EM2
High temperature high speed polyurea grease.
NLGI 2

Specifications
  • ISO 6743-9: L-XBFEA 2
  • DIN 51502: K2R-20
Applications
  • ALTIS EM 2 is pre-eminently designed for the lubrication of electrical motor bearings.
  • Also suitable for lubrication of bearings, slides, racks subjected to high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of extraction fans for hot gas or steam, bearings of dryers, pumps, oven conveyors, and all other applications where rotation speeds and temperatures are high.
Extreme High Temp Shock Resistant Molybdeneum Disulfide Grease

CALORIS MS 23
High temperature bentone clay grease with molybdenum disulfide.
NLGI 2-3

Specifications
  • ISO 6743-9: L-XAEEA 2/3
  • DIN 51502: MF2/3P -15
Applications
  • Lubrication of slow moving mechanisms subjected to very high temperatures and repeated shocks. The presence of molybdenum disulfide will guarantee good lubrication, and avoid any jamming or sticking.
  • Allows peak temperatures up to 220°C, provided that the period of operation at this temperature is limited and that the equipment is re-greased frequently.
  • CALORIS MS 23 grease offers the possibility of working in a corrosive atmosphere due to its resistance to mild alkaline and acidic solutions.
Extreme Condition Copper Grease

SPECIS CU
Bentone and copper anti seize grease for work in very severe corrosion conditions in the presence of water vapour or aggressive gases.
NLGI 1

Specifications
  • ISO-L-XAFBB 1
  • DIN 51502 MPF1R-10
  • Bentone and Copper
Applications
  • Anti-seize grease for applications working very severe corrosion conditions in presence of water vapour or aggressive gases.
Anti Corrosion Anti Seizure Metal free Grease

TIFORA PG
Heavy metal free dual purpose grease for protection and
NLGI 1.5

Specifications
  • ISO-L-XAFBB 1
  • DIN 51502 MPF1R-10
  • Bentone and Copper
Applications
  • TIFORA PG is an innovative heavy metal-free lubricating grease specifically developped for both protection and "make up" of ‘premium’ (casing/tubing) connections.
  • It can be used to replace the heavy metal API dopes (traditionally leaded) and also conventional protection products used for API connections.
  • It may also be used for applications where good anti-seizure properties are required.
  • If an anti-corrosion product is demanded, TIFORA PG can be proposed as an alternative, and is particularly suited when in a environment exposed to salt spray, such as on marine and dockyard equipment.
Inhibited Transformer Oil

ISOVOLTINE KA 7-4
High voltage insulating oil.

Specifications
  • BS 148-1984 Class 1
  • IEC 296-1982 Class 1
Applications
  • Transformers, switchgears, contacts, welding sets and all high voltage electrical equipment.
Anti-Wear

AZOLLA AF
High voltage insulating oil.
ISO VG 22 to 100

Specifications
  • ISO 6743/4 HM
  • DIN 51524-2 HLP
  • AFNOR NFE 48-603 HM
  • EATON 1-286-S, M~2950-S
  • Cincinnati-Milacron P68.P69,P70
  • Denison HFO, HF1, HF2 (T6H20C)
  • SEB 181222
Applications
  • Hydraulic systems especially sensitive to the formation of deposits and/or operating in high temperature and pressure conditions.
  • Bearings and miscellaneous devices.
Anti-Wear

AZOLLA ZS 22-32-46-68-100-150
Very high performance anti-wear hydraulic oils.
ISO VG 10 to 150

Specifications
  • ISO 6743/4 HM
  • DIN 51524-2 HLP
  • AFNOR NFE 48-603 HM
  • EATON 1-286-S, M~2950-S
  • Cincinnati-Milacron P68.P69,P70
  • Denison HFO, HF1, HF2 (T6H20C)
  • SEB 181222
Applications
  • Hydraulic systems especially sensitive to the formation of deposits and/or operating in high temperature and pressure conditions.
  • Bearings and miscellaneous devices.
High Viscosity Index

EQUIVIS ZS 15-22-32-46-68-100
High viscosity index anti-wear hydraulic oils.
ISO VG 15 to 100

Specifications
  • ISO 6743/4 HV
  • DIN 51524-3 HVLP
  • AFNOR NFE 48-603 HV
  • Vickers 1-286S, M-2950S
  • Cincinnati-Milacron P68
  • P69, P70
Applications
  • All hydraulic systems operating under high temperature and pressure conditions and requiring an anti-wear oil possessing a high viscosity index (VI>160)
  • Equipment working outside with extensive differences in temperature (public works, quarries, etc.)
High Viscosity Index

EQUIVIS XV
Very high viscosity index anti-wear hydraulic oils with high shear resistance.
ISO VG 32 to 46

Specifications
  • AFNOR NF E48-603 HV
  • ISO 6743/4 HV
  • DIN 51524 P3 HVLP
Applications
  • Is a range of anti-wear hydraulic fluids recommended for all kinds of hydraulic circuits operating within a very wide temperature range.
  • Their excellent viscosimetric properties and their high shear resistance make the oils especially suitable for the use in mobile machines hydraulic systems intended for cold regions or which have to work in low temperature environments such as cold stores.
Biodegradable Hydraulic Fluids

BIOHyDRAN TMP
Biodegradable synthetic hydraulic oil.
ISO VG 32 to 100

Specifications
  • ISO 15380 HEES
  • European Ecolabel
Applications
  • Public works machines, agriculture, mountainous terrain, navigation, forestry and miscellaneous equipment.
  • Optimal operating temperatures: -20 °C to +80 °C.
  • Miscible with mineral oils.
Biodegradable Hydraulic Fluids

BIOHyDRAN SE 46
Biodegradable hydraulic oil.
ISO VG 46

Specifications
  • VDMA 24568 TYP HEES
Applications
  • Public works machines, agriculture, mountainous terrain, navigation, forestry and miscellaneous equipment.
  • Operating temperatures likely to exceed +80 °C.
Biodegradable Hydraulic Fluids

BIOHyDRAN FG
Biodegradable hydraulic oil.
ISO VG 46

Specifications
  • NSF H1
  • ISO 15380 HETG
Applications
  • Hydraulic systems presenting risks of leaks of fluid into the environment and incidental contact with foodstuffs: grape harvests, crop harvests...
  • Operating temperatures: -20 °C to +70 °C.
Biodegradable Hydraulic Fluids

BIOHyDRAN RS 38B
Biodegradable hydraulic oil.
ISO VG 38

Specifications
  • VDMA 24568 TYP HETG
Applications
  • Vegetable oil based biodegradable hydraulic fluid.
  • Applied as a replacement of hydraulic mineral oils in activities such as civil engineering, construction, quarrying, gravel piles...
  • Particularly recommended when there is a possible contamination of water: forestry operations, off-shore, river dredging, winter sport...
  • Can replace mineral oils after a complete drain of the circuit followed by a replacement of the filter.
Fire-Resistant Hydraulic Fluids

HyDRANSAFE HFAE
Water-emulsifying hydraulic fluid concentrate.

Specifications
  • ISO 6743-4 HFAE
  • ISO 12922
Applications
  • Hot pressing machines and systems specially designed for low-viscosity aqueous fluids.
  • Operating temperatures: +5 °C to +55 °C.
Fire-Resistant Hydraulic Fluids

HyDRANSAFE HFA S1
Fire resistance hydraulic fluid.

Specifications
  • ISO 6743-4 HFAS
  • ISO 12922
Applications
  • HYDRANSAFE HFA S1 is a synthetic water soluble hydraulic fluid concentrate, for use in hydraulic systems that are equipped to operate with fire resistant hydraulic fluid type HFA, water solutions.
  • HYDRANSAFE HFA S1 is normally used as a concentration of 3% in demineralized water or tap water.
  • HYDRANSAFE HFA S1 is designed for operating in possible fire risk areas, such as in Coke Oven Plants and Rolling Mills in the steel industries, in Mining and in Foundry.
  • Operation temperature range is from +5 to 55°C.
  • Storage temperature of +5°C to + 50°C is recommend.
Fire-Resistant Hydraulic Fluids

HyDRANSAFE HFC 146
Fire resistance hydraulic fluid.
ISO VG 46

Specifications
  • ISO 6743-4 HFC
  • ISO 12922
Applications
  • HYDRANSAFE HFC 146 is a high performance synthetic water-polymer, fire resistant hydraulic fluid.
  • Regulation and hydraulic circuit of Furnaces, Continuous Casting Units in the Steel and Aluminium Industry, Heat-treat Ovens for quenching operations, Drying Furnace and other applications in fire risk areas, as in mining industry...
  • Hydraulic system of mould injections machines.
  • Operating temperature range is from -20°C to +60°C.
  • When changing from a mineral oil based hydraulic system components and to apply an appropriate cleaning of the hydraulic system.
Fire-Resistant Hydraulic Fluids

HyDRANSAFE HFDU
Fire resistance hydraulic fluid.
ISO VG 46

Specifications
  • ISO 6743-4 HFDU
  • ISO 12922
  • Factory Mutual in accordance with FM approval standards
  • 6930 Flammability classification of industrial fluids
Applications
  • HYDRANSAFE HFDU 46 is a high performance fully synthetic ester type, fire-resistant hydraulic fluid.
  • HYDRANSAFE HFDU 46 is designed for hydraulic equipment operating in possible fire risk areas such as in Continuous Casting Units and Hot Rolling Mills in Steel Industries, Undergrounds, Theaters. The product is suitable for operating temperature up to 120°C.
  • Whereas HYDRANSAFE HFDU 46 is compatible with mineral oil and ester type fluids, cleaning and flushing of the system is recommended to achieve optimal results.
Fire-Resistant Hydraulic Fluids

HyDRANSAFE FR NSG 38
High performance fire-resistance phosphate ester based hydraulic fluid.
ISO VG 46

Specifications
  • ISO 6743-4 HFDR
  • ISO 12922
  • GEC Alstom - SBV PR 1001C
  • ABB - HTGD 690 149 V0001K
  • Siemens KWU - TLV 9012 02
  • EDF HN 20-S-41
  • Westinghouse
Applications
  • HYDRANSAFE FR-NG 38 is a high performance, fire resistant hydraulic fluid based on selected phosphate esters and designed for hydraulic circuits which require the use of safety fluids.
  • HYDRANSAFE FR-NG 38 is especially designed for use in electrohydraulic governor systems of steam turbines, including systems using fine tolerance servo valves.
  • Working temperature: -10 to +120°C.
Fire-Resistant Hydraulic Fluids

HyDRANSAFE FRS
Fire-resistance phosphate ester based hydraulic fluid.
ISO VG 32 to 46

Specifications
  • ISO 6743-4 HFDR
  • ISO 12922
Applications
  • Hydraulic installations operating in close proximity to potential ignition sources such as hot or molten metal and require the use of safer hydraulic fluids than the conventional petroleum oils: industries such as steel making, metal diecasting, coal mining, power generation or navy buildings.
  • Working temperature: -10 to +70°C (+150°C: upper temperature limit for short-term operation).
Fire-Resistant Hydraulic Fluids

HyDRANSAFE HFDU LC 168
Fire-resistance hydraulic fluid.
ISO VG 68

Specifications
  • ISO 6743/4 HFDU
  • DMT (Germany), spray test
  • According 7th Luxembourg Report ISO 15029-1
Applications
  • High performance fully synthetic ester type, fire-resistant hydraulic fluid.
  • Designed for hydraulic equipment operating in possible fire risk areas such as in Continuous Casting Units and Hot Rolling Mills in Steel Industries, Undergrounds, Theaters. The product is suitable for operating temperature up to 120°C.
  • Compatible with mineral oil and ester type fluids, cleaning and flushing of the system is recommended to achieve optimal results.
Synthetic Heat Transfer Oil

SERIOLA KL 1120
Synthetic heat transfer fluid based on Alkylbenzene.

Specifications
  • KS M 2501
Applications
  • Heating of domestic and industrial premises
  • All types of systems(piping, pumps, etc.)
  • Production of steam and hot water
  • Heating of heat treatment baths
  • Temperature control for storage bins
  • Manufacturing processes
  • Heating by heat exchange
  • Operational temperature: from -20°C to 290°C
Synthetic Heat Transfer oil

SERIOLA K 2120
Synthetic heat transfer fluid based on Alkylbenzene.

Applications
  • Heating of domestic and industrial premises
  • Production of steam and hot water
  • Temperature control for storage bins
  • Heating by heat exchange (counter-current heat exchangers)
  • Recommended for all types of closed heat transfer systems (pipes, pump, etc...)
  • Heating of heat treatment baths, autoclaves, reaction vessels, furnaces, dies, tunnel dryers, injection moulding machines, etc.
  • Manufacturing processes (cement works, paper mills, timber industry, etc...)
  • Operational temperature limits, from –30°C to 290°C (closed systems)
Synthetic Heat Transfer oil

SERIOLA K 3120
Alkylbenzene synthetic heat transfer fluid.
Viscosity @ 40

Specifications
  • ISO 6743/12L-QB
  • DIN 51502L
  • KSM 2501
Applications
  • Synthetic Heat Transfer Fluid based on Alkylbenzene
  • Recommended for all types of closed heat transfer systems (piping, pumps, etc.) at domestic and industrial premises
  • Operational temperature: from R20°C to 30QDe
Mineral Heat Transfer Oil

SERIOLA ETA
Mineral based heat transfer fluid.
ISO VG 32-100

Specifications
  • ISO 6743/12 class L family QB
  • DIN 51502 class L
  • SERIOLA ETA 32 is approved by the french health Direction for drinking water thermal treatment
Applications
  • Heating of domestic and industrial premises
  • Production of steam and hot water
  • Air conditioning
  • Temperature control for storage bins
  • Heating by heat exchange
  • All types of systems (piping, pumps, etc...)
  • Heating of heat treatment baths, autoclaves, reaction vessels, furnaces, dies, tunnel driers, injection moulding machines, etc...
  • Manufacturing processes (cement works, paper mills, timber industry, etc...)
Mineral Heat Transfer Oil

SERIOLA 1510
Mineral based heat transfer fluid.
Viscosity @ 40

Specifications
  • ISO 6743/12L-QB
  • DIN 51502L
Applications
  • Industrial and domestic 'premises heating
  • Steam and hot water production
  • Air conditioning
  • Storage bins temperature control
  • Heat exchange installations
  • Operating temperatures below 290°C without air contact

PRESLIA 32-46-68-100
Mineral turbine oils.
ISO VG 32 to 100

Specifications
  • ISO 6743-5 L TSAITSE/TGAITGS/TGE
  • DIN 51515 Part 1
  • JIS K2213 Type 2
  • SS 489' OEMs: ASS (Switzerland, Sweden), Aistom, Demag Delaval, Fives Cail Babcock, Garrett, General Electric, GE Hydro, MAN Turbo, Nuovo Pignone, Siemens, Skoda Solar, Thermodyn, Turbomeca
Applications
  • High Performance turbine oil designated (steamer, gas, hydraulic) turbo compressors lubrication

PRESLIA GT
Gas turbine oils.
ISO VG 32 to 46

Specifications
  • ISO 6743-5 TSA/TSE/TGA/TGB/TGE/TGSB/TGSE
  • Alstom HTGD 90117 (formerly ALSTOM NBA P 50001A)
  • General Electric GEK 28143B, GEK
  • 32568F, GEK 107395A, GEK 101941A, GEK 27070, GEK 46506D MAN Energie ME-TTS 001/18/92
  • MAN Turbo SPD 10000242284
  • Siemens TLV 901304
  • Škoda turbíny Plzen
  • Solar ES 9-224 W Class II
Applications
  • Steam and gas turbines, and combined-cycle turbines
Spark Erosion

EDM 3
Electro Discharge Machine Fluid.
Viscosity @ 20

Specifications
  • Charmilles Technologies (Switzerland)
  • Ong (Spain and France)
  • Ingersoll (France)
  • Ingersoll Hansen (France)
  • Agie (Switzerland and France)
Applications
  • Multifunctional fluid for rough machining as well as finishing operations particularly recommended to users who look for a single product to perform all operations and for all types of parts
Soluble Cutting Oil

Lactuca LT2 AP
Emulsifiable Cutting Oil.

Specifications
  • ISO-L-MAA
Applications
  • Lactuca LT2 AP is specifically designed for the conventional machining of copper alloys and screw cutting brasses.
  • It is also fully satisfactory for all processes involving fine carbon steels.
  • Recommended proportions : 3 to 6%.
  • Temporary protection of mechanical parts, machined or not, where easy removal of the protection product is required.
Machine Tool

DROSERA MS 46-68-100-220
Machine tool slide ways under all conditions of speed and load. Hydraulic circuits for hydraulic pumps and motors.Gear boxes and feed mechanisms of all types with or without wet electro magnetic clutches.
ISO VG 2 to 220

Specifications
  • ISO-L-HM
  • ISO-L-HG
  • ISO-L-GA
  • ISO-L-CKB
  • ISO-L-CKC
  • ISO-L-CKE
  • ISO-L-FD
Applications
  • Machine tool slides and hydraulic circuits
  • Feed boxes and gear boxes of all type
  • Multifunction oil for lubrication of all machine tool parts (hydraulics, slides, gears)
  • For Rapid (Grade 5, 10, 15 & 22) and very Rapid (Grade 2) spindle movements
  • Perfect compatibility with cutting fluids of the TOTAL range
Rust Prevention

OSYRIS HLS 4
A water-repellent rust preventive oil.
Viscosity @ 40

Specifications
  • ISO-L-RC
  • ISO6743/8RE
Applications
  • Protection of machined or non-machined surfaces, machine parts which need to be temporarily protected and where the removal of the protective film is easily degreased
  • Nature of the protective film: oily film
  • Protection Duration: 6 months (indoor/covered), 3 months (outdoor/sheltered)
Rust Prevention

OSYRIS X9100
Solvented protection fluid for very prolonged periods of storage in very harsh conditions.

Specifications
  • ISO 6743/8 (1987): category RF
Applications
  • OSYRIS X 9100 is recommended fur use for all kinds of outdoor protection problems where equipment is exposed to the elements: open air storage, maritime transport.
  • OSYRIS X 9100 may be used with all types of metal parts : sheet metal, individual machine parts, etc...
High Temperature Machining Oil

CORTIS SHT 200
Oils for moving parts operating at very high temperatures.

Applications
  • CORTIS SHT is a synthetic oil that is particularly suitable for lubricating moving parts operating at very high temperatures.
  • Roller chains, conveyor rollers, and cams operating in furnaces and ovens.
  • Manufacture of glass containers: feeder and is machine mechanisms.
  • Chains and bars in continuous wood panel production machines.
Synthetic Vacuum Pump Oil

PV SH 100
Semi-synthetic oil for vacuum pumps.
ISO VG 100

Applications
  • Lubrication of reciprocating or rotary vacuum pumps.
  • PV SH 100 is a semi-synthetic oil specially formulated for the pumping of acidic and corrosive gases.
Mineral Vacuum Pump Oil

PV 100 PLUS
Mineral oils for vacuum pumps.
ISO VG 100

Applications
  • Lubrication of reciprocating or rotary vacuum pumps.
  • Allows the equipment to reach secondary vacuum levels for advanced vacuums.
  • PV 100 PLUS is specially formulated for the humid air pumping.
Enclosed Gear

CARTER EP 68-100-150-220-320-460-680
Mineral oils for enclosed gears.
ISO VG 68 to 3000

Specifications
  • ISO 6743/6 cat. CKD
  • DIN 51517 Part 3 cat. CLP
  • Flender
  • AIS1224
  • SEB 181226
Applications
  • Gears in casing irrespective of the loading conditions
  • Bearings and highly loaded couplings
  • Semi-synthetic grades 1500 and 3000 are recommended for lUbricants of furnace vaults, crusher gears, etc...
Enclosed Gear

CARTER SH
Synthetic high performance oil used for gears under high loads and extreme temperatures.
ISO VG 150 to 1000

Specifications
  • ISO 6743/6 cal. CKD/CKT
  • Flender
  • MOiler Weingarten
  • DIN 51517 Part 3 cal. CLP
  • David Brown· AGMA 9005-E02
  • AISI 224
  • Cincinnati-Milacron
  • Usinor FT 161
Applications
  • Synthetic high performance oil
  • Gear in casing under high loads and extreme temperatures
  • Lowering costs by increase in oil-change intervals
Enclosed Gear

CARTER SY
Polyglycol based synthetic oil for industrial transmissions with high sliding rate, reduce wear and engine power consumption.
ISO VG 220 to 460

Specifications
  • DIN 51517 Part 3 cat. CLP
  • ISO 6743/6 cat. CKS/CKT
  • David Brown G type oils' CMD
Applications
  • POLYGLYCOL based synthetic oil
  • Industrial transmissions with a high sliding rate
  • Worn gears reducers
  • Reduce wear and engine power consumption
  • Incompatible with mineral oils and some synthetic oils
Open Gear

CARTER ENS EP700
Lubricant coating for open gears wire ropes.

Specifications
  • NF-ISO 8743-6 category CKJ
Applications
  • Open gears rotating at low speed and high power
  • Ring gears
  • Racks and guide rails
  • Wire ropes and chains
  • CARTER ENS/EP 700 is made fluid by a volatile solvent to facilitate application (as an aerosol)

Neptuna 2T Super Sport
Mineral oil for all pleasure craft 2-stroke petrol engines.

Specifications
  • NMMA TC-W3® RL-00198F officially approved.
  • Has the capability required by the following manufacturers: JOHNSON, YAHAMA, MARINER, SUZUKI...
Applications
  • Mineral oil for all 2-stroke petrol engines for craft used under normal conditions.
  • Mixing with fuel should be accordance with the manufacturer

Neptuna 2T Racing
Semi-synthetic oil for all 2-stroke petrol engines, direct injection or not, pleasure or sports craft.

Specifications
  • NMMA TC-W3® RL-00182F officially approved
  • Conforming to the requirements of API TC
  • Has the capability required by the following manufacturers: BOMBARDIER, SEA-DOO, EVINRUDE, JOHNSON, KAWASAKI, MARINER, MERCURY, SUZUKI, YAHAMA, TOHATSU...
Applications
  • Highly efficient synthetic-based oil for all 2-stroke petrol engines running at high engine speeds
  • Suitable for all types of 2-stroke engines, including direct injection engines. Mixing with the fuel should be in accordance with the manufacturer

Glacelf Plus
GLACELF PLUS antifreeze, when mixed with an appropriate quantity of water, becomes a coolant fluid recommended for all cooling circuits in internal combustion engines in cars and vans, trucks, construction machinery and agricultural tractors. It contains also an organic inhibitor, it is a semi-organic technology.

Specifications
  • AFNOR NFR 15-601
  • ASTM D3306
  • ASTM D4656
  • ASTM D4985
  • BS 6580
  • GM 1825M
  • TL 774 B/C
  • MAN 324
  • GLACEF PLUS has been approved by the following manufacturers, FORD, BMW, MAN, VOLKSWAGEN, PORSCHE.
  • GLACEF PLUS meets the requirements of the following manufacturers, ROVER, CHRYSLER EUROPE, JAGUAR, OPEL-GM, SAAB, AUDI, SEAT, SKODA.
Applications
  • GLACEF PLUS is diluted in demineralised water (<8°F) to form a permanent coolant fluid that can be used throughout the year, giving effective protection against engine freezing or overheating.
  • To obtain a coolant perfectly mixed, it is recommended to mix mechanically the antifreeze with the water. Protection against freezing depends upon the proportions of GLACELF PLUS in the water.
  • It is recommended that at least 30% of the final solution should be GLACELF PLUS.
  • Maximum protection against freezing is obtained at 68%. Do not use in proportions above 70%.
  • GLACELF PLUS is effective: over at least 250, 000km (3000 hours) when used in trucks, over at least 100, 000km (800 hours) in cars.
  • It is recommended that the coolant fluid should be replaced every 3 years or the mileage limits given above
  • The antifreeze GLACELF PLUS, meets the international specifications concerning antifreeze, and the tenders of the important vehicle manufacturers.

Fluide LDS
Synthetic hydraulic fluid.

Specifications
  • PSA S71 2710
Applications
  • Synthetic fluid of orange colour for the hydraulic system of Citroën cars equipped with “HYDRActive 3”
  • Do not use when a mineral fluid of fluo green colour is requested (LHM Plus)

Transmission Syn FE 75W90, 75W140
Synthetic oil for gears.

Specifications
  • API MT-1
  • API GL-4
  • API GL-5
  • MACK GO-J
  • MAN 3343 type SL
  • SAE J 2360
  • Meets the requirements for all RENAULT VI axles (very extended drain interval)
  • SCANIA STO 1:0
  • ZF TE-ML 02B, 05B, 07A, 08, 12B 16F, 17B, 19C
Applications
  • Very high performance synthetic oil developed to meet the T.D.L. concept (Total Drive Line) for synchronized manual gearboxes, axles and reduction gears.
  • Recommended when filters are added to the lubrication system.
  • Recommended for manual gearboxes and axles requiring API GL-4 or API GL-5 or API MT-1 level.
  • Very high performance synthetic oil for axles and reduction gears.
  • High loaded gears.

Transmission BV
Oil for manual transmission.

Specifications
  • PSA PEUGEOT CITROËN B71 2330
Applications
  • TOTAL transmission BV is an oil specially designed for the lubrication of manual gear boxes of passenger cars.
  • TOTAL transmission BV is recommended by PSA for the lubrication of manual gear boxes.

LHM Plus
Mineral hydarulic fluid.

Specifications
  • PSA PEUGEOT CITROËN B71 2710
Applications
  • Hydraulic system of Citroën XM, XANTIA, BX, CX, SM, GS.
  • Hydraulic sytem of Citroën ID and DS vehicles manufactured since September 1966 (parts painted in green).
  • Hydraulic system on Citroën vans N, P and C35.
  • Brake circuits on Ami 8, Ami Super, Dyane and Mehari since September 1977 and on 2CV since July 1982.
  • Lever adjuster of Peugeot 405 X4.
  • Not miscible and not compatible with synthetic fluids including synthetic brake fluids DOT3, DOT 4, DOT 5 and former Citroën fluids of LHS2 type.

RUBIA S 30,40,50
Monograde oil for diesel engine.
API: CF/SF

Specifications
  • API CD/CF/SF
  • ACEA E2
  • MIL-L-2104E
  • MERCEDES BENZ 227.0
  • MAN 270
  • MTU Oil Type 1
  • CATERPILLAR TO-2
  • ALLISON C-4
Applications
  • TOTAL RUBIA S is suitable for all turbocharged or normally aspirated Diesel engines of civil works machines, trucks, fishing boats, locomotives.
  • Suitable for Diesel stationary engines (energy production).
  • TOTAL RUBIA S is also suitable for gear boxes, torque converters, hydraulic systems when the manufacturer requires an engine with an appropriate grade for these applications.

RUBIA FLEET HD 200
Multigrade oil for diesel engines.
15W40, 20W50 API: CF/SG

Specifications
  • API CF/SG
  • ACEA E2
Applications
  • Recommended for all turbocharged or normally aspirated Diesel engines of commercial vehicles (trucks, buses, vans, pick-ups, taxis), civil works machines and locomotives requiring API CF performance lubricants
  • Suitable for all Diesel stationary engines (energy production)
  • Also suitable for gear boxes, torque converters, hydraulic systems when the manufacturer requires an engine oil with an appropriate grade for these applications

RUBIA XT
Multigrade Oil For Diesel engines.
15W40, 20W50 API: CF4/SH

Specifications
  • ACEA E2
  • API
  • CF-4/SJ
  • MIL-L-2104E
  • MERCEDES BENZ 228.1
  • MAN 271
  • VOLVO VDS
  • CATERPILLAR TO-2
  • ALLISON C-4
  • KOMATSU
Applications
  • For all turbocharged or normally aspirated Diesel engines of vehicles operating in the most severe conditions whatever the seasons.
  • Suited for extended drain intervals (up to 30 000km according to manufacturers).

RUBIA FLEET HD 500
Multigrade Oil For Diesel engines.
15W40, 20W50 API: CH4/SJ

Specifications
  • ACEA E2
  • API CH-4/SJ
  • Cummins CES 20071/6
  • Mack EO-M Plus
  • Man 271
  • MB 228.1/229.1
  • MTU Type 1
  • Volvo VDS/VDS 2
  • ZF TE-ML-02C/03a+/04B/04C/07C
Applications
  • All turbo-charged or normally aspirated diesel engines of vehicles operating in the most severe conditions whatever the seasons API CH-4
  • Responded to the API CH-4 specifications for new low emission engines using low sulphut fuels. Extended drain intervals
  • The reserve alkaline level allows the use with high sulfur fuel at appropriate drain interval up to 30, 000KM depending on OEMs recommendation
  • Can handle the most demanding operating conditions: stop and go, long working hours, very heavy loaded condition

RUBIA TIR 7400
Multigrade oil for diesel engines.
15W40 API: CI4/SL

Specifications
  • API Cl-4/SL
  • ACEA 99 E5/E3/B3/B4/A3 / ACEA 02 E5/E3/B3/B4/A2
  • GOBAL DHD-1
  • CUMMINS CES 20071/2/6/7/20078
  • MTU OIL CATEGORY 2
  • MACK EO-M PLUS
  • RVI RLD
  • MAN 271/M3275
  • MB 228.3/MB 229.1
  • VOLVO VDS-3
Applications
  • Super premium diesel engine oil especially formulated to provide outstanding protection to modern, high performance diesel engines used in the toughest onand off-highway applications.
  • Particularly designed using top quality, highly refined base oil together with advance-technology additives to provide reliable performance in the latest emission designs, including those with EGR systems, as well as satisfying the needs of older engines.

RUBIA TIR 7900
Very high performance lubricant for Gas & ULSD Diesel engines.
15W40 API: CJ4/SM

Specifications
  • API CJ-4/SM
  • Mack: EO-O Premium PLus 07
  • Volvo: VDS-4
  • DAIMLER CHRYSLER: MB page 228.31
  • Man: M3275
  • Cummins: CES20081
  • Caterlillar: ECF-3
  • Detroit Diesel: DDC 93K218
Applications
  • Designed to meet the requirements of 2007 engines equipped with after treatment systems. Answer the very severe technical constraints of the new Low-Sulfur Low-Emission Diesel engines.
  • Adapted to the most severe servicing conditions: can be used in trucks, off highway diesel equipment, farm tractors, light trucks with diesel engines turbo-charged or not. Suitable for transport, deliveries, stop & go, constructions, harvesting...
  • Suits all types of diesel and gas engines, particularly ecological using Ultra Low Sulfur Diesel fuels.

RUBIA TIR 8900
New generation Diesel engine oil based on LOW SAPS (EURO 4) technology.
10W40 ACEA E4/E6

Specifications
  • ACEA E4/E6
Applications
  • New generation, synthetic technology, very high performance, Low SAPS (Sulfur, Ash and Phosphorus) heavy duty diesel engine oil.
  • Particularly suitable for the lubrication of the latest generation (EURO 3 and 4) Diesel engines equipped with diesel particulate filters (DPF).
  • May as well be used for Euro 4 engines equipped with selective catalytic reduction (SCR) units as well as Euro 3 engines where recommended by manufacturers.
Condat

CONDAT proposes a wide range of lubricants and related products used in a multitude of industries.

Thanks to its offer integrating numerous complementary fields of expertise, CONDAT is considered THE specialist in developing specific lubrication solutions.

First and foremost a lubricant developer, CONDAT is capable of proposing a solution that is directly applicable to your activity.

Mecagreen 550
A water based coolant made from renewable resources and a coolant concentrate designed for difficult machining.

Specifications
  • Economical: MECAGREEN 550 25-35% percent tooling improvement in most difficult applications due to exceptional lubrication.
  • Performance: MECAGREEN 550 is recommended for aluminium and stainless steel. Does not stain aluminium, especially aeronautic alloys.
  • Micro-biological: Excellent bio-stability achieved through non conventional biocides. New age chemistry maintains sump balance.
  • Environment: MECAGREEN 550 is formulated with a unique blend of vegetable esters, these esters provide a polar reaction at the point of cut that has been optimized for various machining applications.
  • Foaming: High resistant to foaming even in soft water. No mechanical foaming due to high pressure
  • Cleaning: Easily washed with alkaline cleaner or solvent.
Applications
  • Both difficult metal removal and forming applicaitons.
  • Multi metal friendly - Aerospace aluminium alloys, standard aluminium, stainless steel, titanium and titanium alloys.